HiKOKI Cordless Impact Wrench WR18DBDL2

Technical Data

Capacity:
• Bolt: M10 - M20
• High Tension Bolt: M10 - M16
Squire Drive: 12.7 mm
Tightening Torque: 305 Nm
Battery Voltage: 18 V
No Load Speed:
• High Mode: 0 - 3,200 /min.
• Medium Mode: 0 - 2,000 /min.
• Low Mode: 0 - 1,000 /min.
• Single Mode: 0 - 2,700 /min.
Full Load Impact Rate: 0 - 3,600 /min.
Overall Length: 145 mm
Weight: 1.8 kg (with BSL1830C)

Vibration Total Values (triax vector sum):
Vibration Emission Value = 11.7 m/s2
Uncertainty K = 1.5 m/s2

Scope of Delivery

• 1 x HiKOKI 18V Cordless Tools WR 18DBDL2

Free & Extra

Combo 1
• 1 x HiKOKI 36V 2.5Ah Battery BSL36A18 (suitable for 18V 5.0Ah)
• 1 x HiKOKI 36V Super Charger + USB Port UC18YSL3

Combo 2
• 1 x HiKOKI 36V Starter Pack 3 (2.5Ah x 2)

12 Months HiKOKI Warranty

BUY BATTERY & CHARGER FOR THIS TOOL

HiKOKI Battery & Charger

RM 990.00 - RM 2,007.00
Availability: In Stock

SELECT QTY:
+
ESTIMATED DELIVERY DATE:
04/10/2022 - 09/10/2022
SHARE

HiKOKI Cordless Impact Wrench WR 18DBDL2

HiKOKI Power Tools - HiKOKI Cordless Impact Wrench WR18DBDL2

Our Original Brushless Motor Technology

• No wearing parts (carbon brushes, commutator, field coil)
• Our original compact controller

Long Lifetime, Maintenance-Free

The brushless motor offers a significantly extended product life cycle by eliminating trouble including armature burnout, layer short or commutator wear even in severe work environments. Besides, no carbon brush replacement is required.

• Powerful More Torque. More Power.
The max tightening torque is 305Nm for the 18V WR18DBDL2.
The torque is increased by 55Nm (18V) respectively, compared to our conventional models (WR18DBDL).

• Compact Design for Better Handling
The overall length is 145mm, which is 23mm shorter than that of our conventional models
(WR18DBDL).

• Highly Efficient Longer Runtime per Charge (Approx.)
When loosening M20 high-tension bolts tightened at 350 Nm.

• Tightening Mode Selector for a Variety of Applications
Tightening Mode Settings

The tightening torque depends on the material, size and class of the bolt. Make a test fastening to adjust the mode setting to suit the bolt.

• Smooth Socket Changes with a Friction Ring Anvil
The friction ring holds a socket on the anvil, making it easier to install a pin and O-ring to securely lock the socket in place.

Note : It is possible to temporality hold the socket in place with the friction ring, but be sure to insert the pin and attach the O-ring before use. If the power tools is used while the socket is temporarily held in place, the socket may fall off and cause an injury.

• Newly Designed Airflow System for Optimal Cooling Efficiency
The rear fan efficiently cools down the motor and hammer case for more durability.

Cordless impact driver shown for illustration purposes only.

• Well-Balanced Weight Distribution for Better Work Efficiency
Less user fatigue due to the well-balanced design with the center of gravity positioned at the middle finger of the grip hand.

Cordless impact driver shown for illustration purposes only.

• Dust and Water Resistant

Thanks to the unique design of dust-protective cooling windows and fully plastic coating on some important inner parts, this product conforms to IP56 protection class ratings (dust and water resistance) for electrical equipment as stipulated by the international IEC regulations.

• Smooth Control Electronic Switch
Allows for finer adjustments in the low speed range. It is also more efficient in transferring energy resulting in longer tool life.

• Fast Charging Offered by Our Original Charging Technology
Built-in cooling system of the UC18YSL3 charger reduces charging time by efficiently cooling both the battery and charger at the same time during charging.

More HiKOKI Power Tools product range for your choices.

Interested to find out the future of HiKOKI power tools? Learn more at the HiKOKI High Performance Power Tools.

Weight: 1.8 kg
Super Administrator 28/02/2019

Best this product

Write a review

Note:HTML is not translated!
Rating Bad           Good
Weight
0.2 kg